Event: TENAGA EXPO & FORUM
Exhibition Site: KLCC, MALAYSIA
Stall : H 116
Stand : Indian Pavilion
Exhibition date: 17th – 19th July 2018
Overhead Power Transmission Line Hardware LT 11kV & HT 33 kV
- Anchor Shackle 16mm (mild steel, HDG)
- Adjustable Plate
- Aluminium Stirrups for Centre Binding for 11 kV Pin Insulator
- Ball Hooks
- Ball Hooks Horn Holder
- Ball Eye / Ball Link
- Ball Eyes Horn Holder / Ball Link Horn Holder
- Ball Clevises 16mm
- Rock Bolt with Nut & Washer
- Double Eye Bolt
- Eye Bolt
- Insulator Pin
- Insulator Pin for 11kV / 22kV Pin Insulator
- Insulator Pin 33kV
- M20 Eye Bolt
- Pilot Pin
- Pig Tail Hook
- Socket Eye
- Socket Eye Horn Holder
- Socket Clevises
- Shackle Straps
- Suspension Clamps
- Tie Rod & Nut
- Twisted Straps
- Turn Buckles (mild steel, HDG)
- Tension Clamp (Compression Type)
- U Clamp 5/8″
- U Bolts
- Y Type Socket Clevises
- Y Fittings
- Arcing Horn
- Pole Clamps
- Midspan Compression Joints
- Pre-formed Armour Rods
- Parallel Groove Clamps
- Compression Dead End
- Helical Fittings
- Compression Connectors
- Compression Joint for ACSR DOG
- Repair Sleeve for ACSR DOG
- Single Suspension String Assembly for ACSR DOG
- Single Tension Hardware Fittings for AAAC DOG
- Single Tension Hardware Fittings for ACSR DOG Conductor
- Single Tension Set for ACSR DOG
- Stockbridge Vibration Damper
- Bolted Type Single Tension / Suspension Fitting
- Bolted Type Single Tension Fitting with Turn Buckle
- Double Tension String Assembly for Quad ACSR Moose with Turn Buckle
- Double Tension String Assembly for Quad ACSR Moose without Turn Buckle
- Inverted Tension Set
- Inverted Light Duty Tension Set for 1 × Bison
- Inverted Light Duty Tension Set for 2 × Bison
- Inverted LD Tension String for ACSR Bison
- Inverted LD Tension String for ACSR Skunk
- Normal Single Tension String for ACSR Skunk
- Normal Tension Set
- Normal Tension Set 1 × Bison
- Bolted Type Single Tension Clamp with Turn Buckle
- Single Tension Hardware Set for Single ACSR Bison
- Single Tension String Assembly ACSR Single Zebra with Turn Buckle
- Single Tension Hardware Fittings
- Tension Set 33kV with Compression Type Tension Clamp
- Tension Hardware Fitting for DOG Conductor
- Tension with Arcing Horn
- Tension without Arcing Horn
- Tension Set with Cross Strap Bolt
- Upright Light Tension Set
- Upright Light Duty Tension Set for 1 × Bison
- Upright Light Duty Tension Set for 2 × Bison
- Up Right Light Duty Single Tension Hardware Set for Single ACSR Bison
- Up Right Light Duty Single Tension Hardware Set for Single ACSR Skunk
- Double Suspension String Assembly for ACSR LINX
- Double Suspension String Assembly for AAAC 200 mm
- Jumper Suspension Set 1 × Bison
- Jumper Suspension Set 2 × Bison
- Normal Suspension Set 33kV
- Normal Single Suspension String for ACSR Bison with Armour Rod
- Normal Single Suspension String for ACSR Skunk
- Normal Single Suspension String for ACSR Bison
- Normal Suspension Set 2 × Bison
- Single Suspension String Assembly for ACSR LINX
- Single Suspension String Assembly for ACSR Zebra
- Single Suspension String Assembly for Twin Moose Conductor Drop Type
- Single Suspension String Assembly for Zebra Drop Type
- Single Suspension String Assembly for AAAC 200 mm
- Adjustable Stay Set
- Bolts & Nuts
- Curved Washer 65 X 65 X 6 mm
- Doluble Pole Do Fuse Crossarm
- Eye Bolt
- Eye bolt (eye)
- Insulator Hook (PIG Tail Hook)
- Insulator Hook
- Line Tap 16 mm
- Line Tap 35 mm
- Line Tap 70 mm
- Line Tap 95 mm
- M20 x 305 MM Eye Bolt
- Single Pole Transformer Crossarm
- Stay Outrigger Bracket
- Terminating Strap 140 x 10 x 38 mm
- Tie Rod
- Tie Strap