Aluminium Alloy Cast Tension Clamps (Bolted Type)

Bolted Type Tension Clamp - Type 1

Sr. No.	Cat. No.	Conductor Dia.		A	B	C	M	No. of U-Bolts	UTS (KN)
		min.	max.
01	UTCB-145	06.75	15	145	105	18	12	2	30
02	UTCB-220A	10.00	16	220	105	18	12	3	45
03	UTCB-220B	10.00	14	220	200	20	12	3	45
04	UTCB-275	10.00	16	275	292	22	16	4	80
05	UTCB-285	10.00	15	285	260	18	12	4	50
06	UTCB-560	33.00	40	560	386	43	16	6	120

Bolted Type Tension Clamp - Type 2

Sr. No.	Cat. No.	Conductor Dia.		A	B	C	M	No. of U-Bolts	UTS (KN)
		min.	max.
01	UTCB-148	10.00	16	148	109	20	12	2	70
02	UTCB-170	10.00	16	170	156	20	12	2	70
03	UTCB-175A	09.00	12	175	110	20	10	3	70
04	UTCB-175B	12.00	15	175	125	19	12	3	70
05	UTCB-180	12.00	15	180	180	17	16	3	50
06	UTCB-187	12.00	15	187	203	19	12	3	80
07	UTCB-220	16.00	22	220	120	23	12	3	70

Note :

1. The above clamps are manufactured from High Strength Aluminium Alloy. Bolts, Nuts, & Plain Washers are of Mild Steel duly hot dip galvanized spring washers are electro plated. U-Bolts, Nuts and plain washers can also be manufactured from Stainless Steel. The Clamps conform to international standards.