Tension Clamps (Compression Type) for Earth Wire / Ground Wire

Tension clamps (Compression Type) are manufactured from Mild Steel forgings duly machined and hot dip galvanized. Inner Dia. of Dead Ends & Jumpers are is re-bored after galvanizing. Earth bond fitting facility is also provided.

Mechanical strength and provides 95% of breaking strength of relative earth wire & conductivity (Tension Clamps Compression Type) is same as that of the Earth Wire.

Sr. No.	Cat. No.	Earth Wire Size	Dimension
			A	B	C	ØD1	ØD2	E	X	Y
01	UTCC-01	7/2.24 mm	76	155	100	08.0	15.2	55	14.7	12.7
02	UTCC-02	7/2.50 mm	76	167	100	08.0	15.3	55	14.7	12.7
03	UTCC-03	7/3.15 mm	76	165	110	10.0	18.0	70	17.4	15.1
04	UTCC-04	7/3.25 mm	76	165	110	10.5	18.0	70	18.5	15.1
05	UTCC-05	7/3.66 mm	76	190	130	11.2	20.8	65	20.2	17.5
06	UTCC-06	7/4.00 mm	76	195	135	12.4	24.0	70	23.4	20.2

 

Tension Clamps (Bolted Type) for Earth Wire

Tension clamps (Bolted Type) are made of malleable cast iron duly machined and hot dip galvanized. These are also available is Aluminium Alloy side fittings can be changed on request.

The clamps provide required Mechanical Strengths as per International Standards.

Sr. No.	Cat. No.	Earth Wire Size	Dimension
			A	B	C	D	No. of "U" Bolts
01	UTCB-01	7/2.24 to 7/3.66 mm	105	145	19	76	2
02	UTCB-02	7/4.00 to 19/3.0 mm	105	220	19	76	3