Side Ties
Side ties for Post, Pin, & Spool Insulators
|
Sr. No. |
Cat. No. |
Ø |
L |
Color Code |
|
Min. |
Maxx. |
|
01 |
UST-01 |
4.60 |
5.66 |
550 |
WHITE |
|
02 |
UST-02 |
5.67 |
6.27 |
550 |
BLUE |
|
03 |
UST-03 |
6.28 |
7.25 |
600 |
YELLOW |
|
04 |
UST-04 |
7.26 |
8.65 |
640 |
BLACK |
|
05 |
UST-05 |
8.66 |
9.54 |
640 |
ORANGE |
|
06 |
UST-06 |
9.55 |
10.82 |
640 |
RED |
|
07 |
UST-07 |
10.83 |
12.06 |
640 |
GREEN |
|
08 |
UST-08 |
12.07 |
13.46 |
640 |
WHITE |
|
09 |
UST-09 |
13.47 |
15.25 |
680 |
BLUE |
|
10 |
UST-10 |
15.26 |
17.38 |
740 |
YELLOW |
|
11 |
UST-11 |
17.39 |
18.95 |
760 |
BLACK |
|
12 |
UST-12 |
18.96 |
20.70 |
760 |
ORANGE |
|
13 |
UST-13 |
20.71 |
22.60 |
760 |
RED |
|
14 |
UST-14 |
22.61 |
24.64 |
760 |
GREEN |
Construction :
Side Ties are designed for securing conductors in
the side groove of Insulators. Both, vertically or
horizontally mounted, they eliminate fatigue and
wear problems on conductors. These have distinct
identification color codes and cross over marks
indicating starting point. The Lay direction
of side ties must be the same as that the outer
strand of the conductor to which it is applied.
It's design takes into account a tie pad to protect
the bare conductor from abrasion at the conductor
insulator interface. Tie pads are not required for
jacketed conductors. These products are manufactured
from Aluminium Allow Wire, or Aluminium covered
steel wire for AAC, AAAC & ACSR Conductors and from
galvanized steel wire for insulated conductors.
The distribution ties are supplied with
identification color code and identification tag
indicating the following :
-
Manufacturer's name
/ logo.
-
Product name and
Cat. No.
-
Lay Direction
-
Minimum and maximum
size of conductor to which it is applied.
-
Month & year of
manufacture.
Mechanical Strength :
Side ties have a slip load not less then 3.20 KN in
unbalanced load conditions. This load is usually
sufficient to contain a broken conductor to asingle
span.
Important : NO TO BE RE-USED AFTER ORIGINAL
APPLICATION.
