|
Parallel Groove Clamps
|
Sr. No. |
Cat No. |
Conductor
Dia. (Max.) |
A |
B |
C |
No. of Bolts |
Bolt Size |
Figure No. |
|
01 |
UPGC-01 |
06.50 |
65 |
45 |
16 |
2 |
M-12 |
A/B |
|
02 |
UPGC-02 |
10.11 |
79 |
48 |
22 |
2 |
M-12 |
A/B |
|
03 |
UPGC-03 |
14.45 |
95 |
57 |
28 |
2 |
M-12 |
A/B |
|
04 |
UPGC-04 |
17.60 |
127 |
65 |
36 |
3 |
M-12 |
A/B |
|
05 |
UPGC-05 |
20.78 |
125 |
65 |
33 |
3 |
M-12 |
A/B |
|
06 |
UPGC-06 |
23.95 |
135 |
75 |
38 |
3 |
M-12/16 |
A/B |
|
07 |
UPGC-07 |
27.13 |
171 |
92 |
52 |
3 |
M-16 |
A/B |
|
08 |
UPGC-08 |
30.38 |
197 |
105 |
59 |
3 |
M-20 |
A/B |
|
09 |
UPGC-09 |
34.24 |
225 |
114 |
67 |
4 |
M-20 |
A/B |
|
10 |
UPGC-10 |
34.24 |
175 |
110 |
55 |
4 |
M-16 |
C |
|
11 |
UPGC-11 |
38.25 |
251 |
124 |
73 |
4 |
M-20 |
A/B |
|
12 |
UPGC-12 |
42.88 |
286 |
133 |
83 |
5 |
M-20 |
A/B |
Parallel Groove Alluminium Alloy Clamps for 70-150
Sq. mm.
Parallel Groove Alluminium Alloy Clamps for 25-70
Sq. mm.
PG Clamps are used to connect two parallel conductors
by accommodating one in each groove. The Conductors
may be similar or dis-similar.
The PG Clamps are made of Aluminium Alloy Castings /
Forgings / Extrusions and provide 1.2 KN (minimum)
slip strength. The electrical power rating is not
less than that of the conductors.
2 Bolted Parallel Groove Clamp (PG Clamp) (22-50
Sq. mm.)
Data
Bolt & Nut : Hot dip galvanised to BS 729
Body : Aluminium
2 Bolted Parallel Groove Clamp (PG Clamp) (50-100
Sq. mm.)
Data
Bolt & Nut : Hot dip galvanised to BS 729
Body : Aluminium
3 Bolted Parallel Groove Clamp (PG Clamp) (100-150
Sq. mm.)
Data
Bolt & Nut : Hot dip galvanised to BS 729
Body : Aluminium
Parallel Groove Clamp (PG Clamp) for ACSR DOG
Technical Data :
-
Material (Body) :
Al. Alloy
-
Ferrous parts are
hot dip galvanised
-
Bolt, nut,
washer-mild steel (HDG), Spring washer - spring
steel electro galvanised
-
General tolerance
±5%
-
All dimensions are
in mm.
Parallel Groove Clamp (PG Clamp) for ACSR Panther
Technical Data :
-
Material (Body) :
Al. Alloy
-
Ferrous parts are
hot dip galvanised
-
Bolt, nut,
washer-mild steel (HDG), Spring washer - spring
steel electro galvanised
-
General tolerance
±5%
-
All dimensions are
in mm.
Parallel Groove Clamp (PG Clamp) for ACSR Weasel
Technical Data :
-
Material (Body) :
Al. Alloy
-
Ferrous parts are
hot dip galvanised
-
Bolt, nut,
washer-mild steel (HDG), Spring washer - spring
steel electro galvanised
-
General tolerance
±5%
-
All dimensions are
in mm.
Parallel Groove Clamp (PG Clamp) for ACSR Drake
Conductor
Technical Data :
-
Material (Body) :
High strength corrosion resistance al. alloy
-
Bolts & nuts :
Steel, CR.-4.6/4.0 to IS : 1367
-
Finish : Ferrous
parts are hot dip galvanised to IS : 1367
Part-13
-
Spring washer
:Spring steel, electro galvanised to IS : 1573
|
