Manufacturers,Exporters,Normal Tension Set 1 × Bison,Pole Line Hardware,Tension Assembly,Normal Tension Set 1 × Bison, High Tension Overhead Power Transmission Line Hardware,Insulator Hardware,Steel Forged Hardware,Mumbai,India

Overhead Power Transmission Line Hardware HT & LT

Pole Line Hardware

-	Tension Assembly
ť	Bolted Type Single Tension Fitting
ť	Bolted Type Single Tension Fitting with Turn Buckle
ť	Double Tension String Assembly for ACSR LINX
ť	Double Tension String Assembly ACSR Single Zebra
ť	Double Tension String Assembly ACSR Twin Zebra with Turn Buckle
ť	Double Tension String Assembly ACSR Twin Zebra without Turn Buckle
ť	Double Tension String Assembly for ACSR Twin Moose with Turn Buckle
ť	Double Tension String Assembly for ACSR Twin Moose without Turn Buckle
ť	Double Tension String Assembly for Quad ACSR Moose with Turn Buckle
ť	Double Tension String Assembly for Quad ACSR Moose without Turn Buckle
ť	Inverted Tension Set
ť	Inverted Light Duty Tension Set for 1 × Bison
ť	Inverted Light Duty Tension Set for 2 × Bison
ť	Inverted LD Tension String for ACSR Bison
ť	Inverted LD Tension String for ACSR Skunk
ť	Normal Single Tension String for ACSR Skunk
ť	Normal Tension Set
ť	Normal Tension Set 1 × Bison
ť	Single Tension Clamp with Turn Buckle
ť	Single Tension Hardware Set for Single ACSR Bison
ť	Single Tension String Assembly ACSR Single Zebra with Turn Buckle
ť	Single Tension Hardware Fittings
ť	Tension Set 33kV with Compression Type Tension Clamp
ť	Tension Hardware Fitting for DOG Conductor
ť	Tension with Arcing Horn
ť	Tension without Arcing Horn
ť	Tension Set with Cross Strap Bolt
ť	Upright Light Tension Set
ť	Upright Light Duty Tension Set for 1 × Bison
ť	Upright Light Duty Tension Set for 2 × Bison
ť	Up Right Light Duty Single Tension Hardware Set for Single ACSR Bison
ť	Up Right Light Duty Single Tension Hardware Set for Single ACSR Skunk
-	Suspension Assembly
-	11kV / 33kV Hardware Assembly

Pole Line Hardware Fittings

Conductor Accessories

Roof Top Fittings

OPGW Fittings

Cross Arm & Accessories

Earth Wire & Hardware

Pole Stay Wire & Stay Set

Porcelain & Composite Insulators

Low Tension Insulators & Hardware

Sub-station Clamps & Connectors

Control Panels & Switchboard Components

Products > Overhead Power Transmission Line Hardware HT & LT > Pole Line Hardware > Tension Assembly > Normal Tension Set 1 × Bison

Normal Tension Set 1 × Bison

Sl. No.	Desc.	Material	Qty.
1	Anchor Shackle	Forged Steel H.D.G.	1
2	Ball Link (H.H.)	Forged Steel H.D.G.	1
3	Socket Eye H.H.	Forged Steel H.D.G.	1
4	Arcing Horn (L.S. & T.S.)	Mild Steel H.D.G.	2
5	Tension Clamp with jumper & steel sleeve compression type	Al. Alloy & M.S. H.D.G.	1 Set

Technical Data :

Ball & socket designation - 16 mm as per BS:3288
Galvanising conforms to BS:729
UTS of hardware string - 75 KN
Slip strength of tension clamp - 95% of U.T.S. of conductor
All ferrous parts are hot dip galvanised except spring washer electro galvanised.
Security clip shall be made of brass / phosphor bronze ("R/W" Type)
Hardware fittings will consist of bolts, nuts, washers, spring washers and split pin where ever required.

Website designed & developed by Webz Solutions