Manufacturers,Exporters,Inverted LD Tension String for ACSR Skunk,Inverted Light Duty Tension String for ACSR Skunk,Pole Line Hardware,Tension Assembly,Inverted Light Duty Tension Set for 2 × Bison, High Tension Overhead Power Transmission Line Hardware,Insulator Hardware,Steel Forged Hardware,Mumbai,India

Overhead Power Transmission Line Hardware HT & LT

Pole Line Hardware

-	Tension Assembly
ť	Bolted Type Single Tension Fitting
ť	Bolted Type Single Tension Fitting with Turn Buckle
ť	Double Tension String Assembly for ACSR LINX
ť	Double Tension String Assembly ACSR Single Zebra
ť	Double Tension String Assembly ACSR Twin Zebra with Turn Buckle
ť	Double Tension String Assembly ACSR Twin Zebra without Turn Buckle
ť	Double Tension String Assembly for ACSR Twin Moose with Turn Buckle
ť	Double Tension String Assembly for ACSR Twin Moose without Turn Buckle
ť	Double Tension String Assembly for Quad ACSR Moose with Turn Buckle
ť	Double Tension String Assembly for Quad ACSR Moose without Turn Buckle
ť	Inverted Tension Set
ť	Inverted Light Duty Tension Set for 1 × Bison
ť	Inverted Light Duty Tension Set for 2 × Bison
ť	Inverted LD Tension String for ACSR Bison
ť	Inverted LD Tension String for ACSR Skunk
ť	Normal Single Tension String for ACSR Skunk
ť	Normal Tension Set
ť	Normal Tension Set 1 × Bison
ť	Single Tension Clamp with Turn Buckle
ť	Single Tension Hardware Set for Single ACSR Bison
ť	Single Tension String Assembly ACSR Single Zebra with Turn Buckle
ť	Single Tension Hardware Fittings
ť	Tension Set 33kV with Compression Type Tension Clamp
ť	Tension Hardware Fitting for DOG Conductor
ť	Tension with Arcing Horn
ť	Tension without Arcing Horn
ť	Tension Set with Cross Strap Bolt
ť	Upright Light Tension Set
ť	Upright Light Duty Tension Set for 1 × Bison
ť	Upright Light Duty Tension Set for 2 × Bison
ť	Up Right Light Duty Single Tension Hardware Set for Single ACSR Bison
ť	Up Right Light Duty Single Tension Hardware Set for Single ACSR Skunk
-	Suspension Assembly
-	11kV / 33kV Hardware Assembly

Pole Line Hardware Fittings

Conductor Accessories

Roof Top Fittings

OPGW Fittings

Cross Arm & Accessories

Earth Wire & Hardware

Pole Stay Wire & Stay Set

Porcelain & Composite Insulators

Low Tension Insulators & Hardware

Sub-station Clamps & Connectors

Control Panels & Switchboard Components

Products > Overhead Power Transmission Line Hardware HT & LT > Pole Line Hardware > Tension Assembly > Inverted LD Tension String for ACSR Skunk

Inverted LD Tension String for ACSR Skunk

Sl. No.	Desc.	Material	Qty.
1	Anchor Shackle	Forged Steel H.D.G.	2
2	Chain Link	Forged Steel H.D.G.	1
3	Socket Eye	Forged Steel H.D.G.	1
4	Ball Eye	Forged Steel H.D.G.	1
5	Tension Clamp	Al. Alloy HDG. Steel	1 Set

Technical Data :

Ball & socket designation - 16 mm as per BS:3288
Galvanising conforms to BS:729
Hardware fittings will conform to DRG.
UTS of complete hardware string - 70 KN except clamp
Slip strength of tension clamp - 95% of UTS of conductor
All ferrous parts are hot dip galvanised
Security clips are made of stainless steel
Hardware fittings will consist of bolts, nuts, washers, spring washers and split pin where ever required.

Website designed & developed by Webz Solutions