Dead End Grips

Helical formed fittings for service grip dead ends suitable for AAC, AAAC & ACSR.

Sr. No.	Cat. No.	Ø mm		L (mm)	B (mm)		Color Code
		Min.	Max.		Min.	Max.
01	USDE-010	4.29	5.05	260	28	75	BLACK
02	USDE-011	5.06	5.71	305	28	75	ORANGE
03	USDE-012	5.72	6.54	330	28	75	RED
04	USDE-013	6.55	7.36	356	28	75	GREEN
05	USDE-014	7.37	8.27	381	28	75	WHITE
06	USDE-015	8.28	9.16	432	28	75	BLUE
07	USDE-016	9.17	10.18	483	28	75	YELLOW

Service Grip Dead Ends are designed to secure conductors for house service (domestic) connections.

Service Grip Dead Ends are recommended for house service due to of minimum length, maximum economy and neat appearance.

Service Grip Dead End is a limited tension deadend : for bare homogeneous messenger conductors (Aluminium, aluminium alloy and copper) the holding strength of grips is about 80 to 90% of the rated conductor strength. With ACSR - AACSR conductors, the holding strength does not exceed 40% to 65% of the rated strength.

Service Grip Dead Ends are manufactured with Aluminium Alloy wire or Aluminium covered steel wire for AAC, AAAC & ACSR and copper coated steel wire for copper conductors. The lay direction is same as the outer layer of the conductor on which it is to be applied.

These accessories are supplied with an identification label indicating the following :

• Manufacturer's name / logo.

• Product name and Cat. No.

• Lay Direction

• Suitable Insulator size

• Minimum and maximum size of conductor to which it is applied.

• Month & year of manufacturing

Upon request, we can also supply the dead-ends made of aluminium covered steel wire with end protection.

For service drop spans exceeding 50 m, the DISTRIBUTION GRIP DEAD-END IS RECOMMENDED.

Important  : NO TO BE RE-USED AFTER ORIGINAL APPLICATION.

 

Helical formed Bare Conductor Dead End for AAC, AAAC & ACSR.

Sr. No.	Cat. No.	Ø		L	Color Code
		Min.	Maxx.
01	UHD-01	3.94	4.11	390	BLACK
02	UHD-02	4.12	4.28	410	ORANGE
03	UHD-03	4.29	4.49	420	RED
04	UHD-04	4.50	4.69	430	GREEN
05	UHD-05	4.70	4.92	430	WHITE
06	UHD-06	4.93	5.15	450	BLUE
07	UHD-07	5.16	5.40	480	YELLOW
08	UHD-08	5.41	5.58	490	BLACK
09	UHD-09	5.59	5.81	500	ORANGE
10	UHD-10	5.82	6.09	510	RED
11	UHD-11	6.10	6.26	530	GREEN
12	UHD-12	6.27	6.54	540	WHITE
13	UHD-13	6.55	6.87	560	BLUE
14	UHD-14	6.88	7.13	570	YELLOW
15	UHD-15	7.14	7.36	570	BLACK
16	UHD-16	7.37	7.58	570	ORANGE
17	UHD-17	7.59	7.89	590	RED
18	UHD-18	7.90	8.27	590	GREEN
19	UHD-19	8.28	8.65	600	WHITE
20	UHD-20	8.66	8.93	610	BLUE
21	UHD-21	8.94	9.34	640	YELLOW
22	UHD-22	9.35	9.67	650	BLACK
23	UHD-23	9.68	10.13	690	ORANGE
24	UHD-24	10.14	10.51	710	RED
25	UHD-25	10.52	10.81	750	GREEN
26	UHD-26	10.82	11.27	760	WHITE
27	UHD-27	11.28	11.75	770	BLUE
28	UHD-28	11.76	12.23	840	YELLOW
29	UHD-29	12.24	12.79	870	BLACK
30	UHD-30	12.80	13.25	890	ORANGE
31	UHD-31	13.26	13.83	920	RED
32	UHD-32	13.84	14.42	940	GREEN
33	UHD-33	14.43	15.10	990	WHITE
34	UHD-34	15.11	15.71	1040	BLUE
35	UHD-35	15.72	16.37	1120	YELLOW
36	UHD-36	16.38	17.06	1200	BLACK
37	UHD-37	17.07	17.79	1250	ORANGE
38	UHD-38	17.80	18.53	12.70	RED
39	UHD-39	18.54	19.30	1300	GREEN

Dead ends are used to hold bare, homogeneous conductors.

These products are manufactured using aluminium alloy or alluminium covered steel wires for bare conductors in jacketed conductors steel wire is used.

Mechanical strength is upto 95% of that of the conductor on which it is to be applied.

These products are supplied with identification color code & cross over mark as well as identification tag, mentioning the following :

• Manufacturer's name / logo.

• Product name & Cat. No.

• Lay direction

• Minimum and maximum side of conductor to which it is be applied.

• Month & year of manufacture.

Important  : NO TO BE RE-USED AFTER ORIGINAL APPLICATION.