11kv / 33kv Tension Hardware Assembly 

Anchor shackle, Ball link & socket eye suitable for ACSR 50 sq.mm. / 100 sq. mm.

11 kV Tension Hardware Assembly

 

Aluminium Alloy Cast Tension Clamps (Bolted Type)

 

Tension Clamp for 33 kV Line Aluminium Alloy Clamp

Bolted type aluminium alloy tension clamps are recommended for use on ACSR and aluminium cables. Clamp bodies and keeper piece are high strength and heat-treated cast aluminium alloy. Cotter bolts and U-bolts are galvanised steel. Cotter pins (split pins) are brass or stainless steel.

Ultimate strength : approx. 8000 kgs.

 

Strain Clamp (3 bolt) for COND. range Min UTS 70kN

8.9 to 17.8 mm dia. AAC, AAAC & ACSR

The clamps have slip strength not less than 85% or rated ultimate strength of standard ACSR or aluminium conductor.

Sl. No.	Desc.	Material	Qty.
1	Body	Aluminium Alloy	1
2	Keeper	Aluminium Alloy	2
3	Cotter PIN Ø 16	Galv. Forged Steel	1
4	Plain washer Ø 16	Galv. M.S.	1
5	Split Pin	Stainless Steel	1
6	'U' Bolt Ø 12	Galv. Steel	3
7	Plain washer Ø 12	Galv. M.S.	6
8	Spring Washer Ø 12	Galv. Steel Spring	6

 

Tension Clamp 2 Bolted

Technical Data :

1. Aluminium keeper & clamp - aluminium alloy

2. U bolt & nut - steel, finish hot dip galvanised

3. Spring washer - spring steel, finish electro galvanised

 

Tension Clamp 4 Bolted

Tension Clamp 5 Bolted

 

Tension Clamp 6 Bolted

Tension Clamps 2 bolted to 6 bolted (max UTS 12000 kgs available)