Sl. No.	Desc.	Material	Surface Treatment	Qty.
1	Anchor Shackle	Forged Steel-I/IV,  IS:2004	H.D.G.	2
2	Steel dead end	Mild steel, IS:2062	H.D.G.	1
3	Jumper	Mild steel, IS:2062	H.D.G.	1+1
4	Outer Al. Sleeve	Al. (99.5% pure)	-	1
5	Filler Al. Sleeve	Al. (99.5% pure)	-	2
6	Plain Washer M12	Mild Steel, IS:2062	H.D.G.	1
7	Spring Washer M12	Spring steel, IS:4072	E.G.	2
8	M12 Bolt & Nut	Mild Steel, IS:1367	H.D.G.	2
9	M16 Bolt & Nut	Mild Steel, IS:1367,5,6	H.D.G.	2
10	Plain Washer M16	Mild Steel, IS:2062	H.D.G.	2
11	Split pin	Stainless Steel	-	2

Technical Data :

1. Slipping strength of clamp assembly not less than 95% of UTS of earth wire

2. Breaking strength of hardware assembly 70kN

3. Fittings shall conform as per drawing

4. All ferrous parts shall be hot dip galvanised as per BS 729

5. Purity of aluminium - 99.5%

6. All dimensions are in mm.

7. General tolerance ±3%

8. Total weight - 3.0 kg approx.