BW Type Cable Gland

BW 2 Part Cable Gland PU-001

Size :	20mmS, to 90 mm
Application :	Use with SWA, Plastic and rubber (Elastomer) sheathed cables.
Use :	Dry indoor application for armoured cable.

 

BW 4 Part Cable Gland PU-002

Size :	20mm, to 90 mm S & L
Application :	Suitable for SWA, plastic & rubber sheathed cables.
Use :	Indoor applications

 

CW Type Cable Gland

CW 3 Part Cable Gland PU-003

Size :	20mm, to 90 mm S & L
Application :	Suitable for SWA, plastic & rubber (Elastomer) sheathed cables.
Use :	Dry indoor application for armoured cable.

 

CW 4 Part Cable Gland PU-004

Size :	20mm, to 90 mm S & L
Application :	Suitable for SWA, cable that are plastic or rubber sheathed.

 

E1W Type Cable Gland PU-005

Size :	20mm, to 90 mm S & L
Application :	This all weather gland effects the cable outer sheath and the gland nut and between the cable inner sheath and the gland body.

 

A2, A1/A2 Type Cable Gland PU-006

Size :	16mm, to 110 mm S & L
Application :	Manufactured in brass to comply with the specifications and requirement of BS 6121
Use :	Suitable for use on rubber or plastic, un-armoured cable.

 

ALCO Type Cable Gland PU-007

Size :	G 204 to G 755
Application :	Used with SWA, Plastic and rubber sheathed cables.
Use :	Dry indoor application for armoured clamp.
Material :	Brass & nickle plated.

 

PG Cable Gland PU-008

Size :	PG 7 to PG 48
Application :	To DIN 46320/46255 available with strain relief facility with round or hex intermediate sockets, long and short antithreads.
Material :	Brass & nickle plated.

 

TRS Cable Gland PU-009

Size :	16mm, to 32 mm
Application :	While not manufactured to a specific standard, are accepted by many contractors and use as satisfactory method of securing flexible cables.

 

Brass Flexible Adaptor PU-010

Size :	20mm, 25mm, 32mm, 3/4", 1", 5/4", 3/2", 2"
Application :	Male/Female thread with / without lock nut & screw.

 

Marine Cable Gland PU-011

Size :	10mm, to 70 mm
Application :	Used for various marine applications.

 

BWR Cable Gland PU-012

Size :	BWR 0 to 7
Application :	For indoor use. Two piece handling. No loose parts. Freely rotating captive cone. Available in brass and nickel.

 

Split Bolt Connector PU-013

Size :	10mm, to 240 mm
Application :	Brass split bolt made of high tensile brass. Pressure pads are made from struded bars to prevent pads from cracking. Available in natural brass, copper coated and aluminium coated.

 

Lock Nuts PU-014

Size :	Metric M 20 to M 75, Imperial 3/4" to 3", PG 7 to PG 48
Material	Available in natural brass, Brass nickle plated & MS zink plated.