Overhead Power Transmission Line Hardware HT & LT Control Panels & Switchboard Components

 

 
Products > Overhead Power Transmission Line Hardware HT & LT > Helical Fittings > Armour Rod
 
Armour Rod
 
Armour Rod
Sr. No. Cat. No. Conductor P A Rod No. of Rods/Set
Code Name Dia. L ØD
1 UPAR-01 Squirrel 06.33 1016 3.71 07
2 UPAR-02 Weasel 07.77 1067 3.71 08
3 UPAR-03 Rabbit 10.05 1320 4.24 09
4 UPAR-04 Mink 10.98 1320 4.24 10
5 UPAR-05 Raccoon 12.27 1370 4.24 10
6 UPAR-06 Dog 14.15 1524 4.62 11
7 UPAR-07 Leopard 15.84 1625 4.62 12
8 UPAR-08 Coyote 15.89 1625 4.62 12
9 UPAR-09 Tiger 16.52 1625 4.62 12
10 UPAR-10 Ash 18.13 1778 5.18 12
11 UPAR-11A Wolf 18.13 1830 5.18 12
12 UPAR-11B Wolf 18.13 1778 5.18 12
13 UPAR-12 Lynx 19.53 1830 5.18 13
14 UPAR-13 Panther 21.00 1930 6.35 11
15 UPAR-14 Bear 23.45 2030 6.35 12
16 UPAR-15 Grossbeak 25.16 2388 7.87 12
17 UPAR-16 Goat 25.97 2388 7.87 12
18 UPAR-17 Kundah 26.82 2388 7.87 12
19 UPAR-18 Drake 28.14 2540 7.87 12
20 UPAR-19 Zebra 28.62 2540 7.87 12
21 UPAR-20 Deer 29.98 2540 7.87 13
22 UPAR-21 Moose 31.77 2540 9.27 12
23 UPAR-22 Bersimis 35.05 2540 9.27 13

Pre-formed armour rods are manufactured from aluminium alloy IS:65032 for the protection of conductors at the point of suspension, on alignment with angles. They protect conductors for line angle upto 30º. Armour rods fit tightly with the conductor and sit on the suspension clamps thus preventing bending of conductor thereby restoring conductivity.

Lay direction of the armour rods is same as that of the outer standing of the conductor to which it is applied. Armour rods are supplied either with ball ends or parrot bill ends.

 
   
 

Website designed & developed by Webz Solutions